АНР-110 (6522)-125.01 – ПОЖМАШИНА

Description

Pump - hose fire-fighting truck is designed for:

delivery of crew and fire-fighting equipment to the site of fire;

laying and taking away pressure magistral hose lines;

delivery of water from water basin by means of monitors or two outlet pipes to power pump, fire tanker and movable water and air-foam guns at places where there is no water supply and water basin is situayed at a long distance;

delivery of air-mechanical foam from tank or outside containet by means of monitor or two outlet pipes through hose lines;

operatin on pumping over of water to other trucks at long distance from water basin;

making supply of water  at artficial ponds .

Specifications

Mass of the car with full load, kg

27500, 33100 with wet sleeves

to the front

7500

on the back

20000

Curb weight, kg, not more

24245

Overall dimensions (length: width: height), mm

9500:2500:3900

Water, not less

2,0 (2000)

Frother, not less

1(1000)

Pump

НЦП-110/100

Pump feed, l / s

6600 (110)

rated power consumption, kW (hp), not more

185/250

nominal pressure, MPa (kgf / cm2)

1,0 (10)

Maximum geometric suction lift, m

7,5

Duration of filling the pump at the highest geometric suction height, s, not more

60

Number of foam generators pcs.

ГПС-600, 12pcs

Frother Dispenser

water jet ejector

Type of water filling system

autonomous, semi-automatic, with two vane electrically driven pumps

Fire monitors

ЛСД-С100У

working pressure, MPa (kgf / cm2)

0,6÷1,0 (6÷10)

flow rate, l / min (l / s)

6000 (100)

Water jet delivery range, m

84

Range of supply of a foamy direct stream, m

74

horizontal rotation angle

355

angle of rotation in the vertical plane, degree

from -8 to +85

Controlling the fire monitors

front, on the roof of the body, remote from the cockpit or remote control, electric

The composition of the jet

water / foam

jet feeding types

solid / sprayed

The method of laying pressure hoses

mechanized (on the run of the car in one or two lines)

Sleeve assembly method

mechanized, separate rolls

diameter 77, mm

5000

diameter 150, mm

3500

Base chassis

КАМАЗ-6522

Chassis type

all-wheel drive

Wheel formula

6×6, wheels rear trolley dual

Type of wheels and tires

12.00 R20

Spare wheel

there is

Engine

740.61-320 V8, diesel turbocharged

Environmental standard

Euro-3

Power (max), kW (hp)

320

working volume, l, not less

11,76

transmission

ZF 16S151, mechanical, 16-speed

Clutch

MFZ 430, 1-disk, with PGU

Brake system

brake mechanisms of drum type with pneumatic drive and ABS

Steering gear

mechanical, with hydraulic booster

Speed (max), with full load, km / h

85

Fuel consumption, l / 100 km

31

Fuel tank capacity, l, not less

350

Maximum lift,%

25

Turning radius, overall, m

12,5

System voltage, V

24